posted
I’m planning to expand my setup and looking for something with a lot more power than what I’ve got now. I don’t mind noise or heat — I have a space that can handle it. Just want the best hashrate possible that won’t need constant troubleshooting. What’s the go-to high-end rig right now?
Posts: 73 | Registered: Nov 2024 | Site Updates: 0
| IP: Logged |
posted
If you're aiming for pure performance, then your best bet is getting a high hashrate bitcoin miner with top-tier specs, solid reliability, and a cooling system that can handle full load around the clock. I’ve seen rigs with 260+ TH/s that run stable as long as you have proper airflow and a 220V setup. I currently run one of the newer hydro-cooled units — it pulls around 3600W but stays cool and doesn’t throttle. Setup wasn’t too bad, but you’ll need to plan for a bigger breaker and maybe even a subpanel depending on your space. Also, not all high-performance miners have stable firmware, so definitely check if there are known issues before buying. And look at power efficiency — some older high-TH/s machines eat up way more power than necessary. I’ve tested both new and older units side-by-side and the newer generation really delivers much better balance between heat, noise, and actual profit. Just make sure your infrastructure can handle it or you’ll burn through cables fast.
Posts: 80 | Registered: Nov 2024 | Site Updates: 0
| IP: Logged |
UBBFriend: Email this page to someone!
Printer-friendly view of this topic
